The AnyCubic Mega Pro review manufactures good but reasonably priced 3D printers, and with each new model, the features and capabilities of their equipment advance significantly. Because of this, the AnyCubic and its Mega series are among the most widely used printer lines.
Not only is it excellent, but there are a ton of internet tips that teach you how to push this under-$350 printer to rival the finest in the business.
The AnyCubic Mega Pro (opens in a new tab) is a considerably superior printer than its price point because to its updated extruder, upgraded metal frame, exceptionally quiet motor driver, and sophisticated features.
See the article The Best 3D Printers for Beginners 2022
The 3D print specifications appear fantastic, but AnyCubic has also discovered a clever laser engraving option that works with printheads and is included as standard.
ANYCUBIC Mega Pro 3D Printer Review
The Mega Pro is built like a normal three-axis 3D printer, with the print head sliding over the x-axis and up through the Z-axis and the print base moving back and forth along the Y-axis.
As a result, the front of the printer has a very small profile, which makes it simple to set it down on a table or work area.
The incorporation of electronics inside 3D printers to conceal wires, motors, and control boards is an emerging design trend.
Mega Pro also demonstrates the development of 3D printer capability thanks to a welcoming touch screen on the front that makes it simple to use and comprehend.
The printer’s design is well-thought-out, and it has a strong metal frame to keep everything stable.
Despite the fact that the SD card slot and USB connector are a little challenging to reach, the placement of the electrical power and filament winding looks to have been properly thought out.
Recently, I’ve seen certain design improvements on other printers that aid in maintenance and customization. The huge bed adjustment knob under the print bed, which makes it simple to level the bed, is the most remarkable feature.
The huge, strong metal frame of the Mega Pro is built to guarantee that the model prints with the least amount of vibration and wobbling possible.
The front touchscreen, a technology that is just recently beginning to appear on devices at this price range, is responsive and effective.
The new, wider adjustment knobs for leveling the first bed are one feature I truly enjoy since they make the procedure really simple. This manual print bed adjustment works in conjunction with a smart plug-in bed alignment module, which I’ll explain in the performance section.
Additionally, a filament detector has been included, ensuring that the printer will turn off on its own if it runs out of filament. Resuming printing is another fail-safe that enables you to recover from a power outage.
The ability to start and stop printing allows you to switch color filaments in the middle of a print, which is one of the more popular features. It’s a hassle, but it’s a terrific feature.
The print platform is the last thing to mention; this is one of the few printers available today that has a textured glass platform. When printing, it offers an excellent hold, but once the print has cooled, it releases with ease.
Last but not least, you have the additional functions of that laser engraver if 3D printing features aren’t your thing. The piggyback design makes this installation quick and simple to put up, taking only around five minutes.
Like virtually all manufacturers, AnyCubic suggests using Cura as the machine’s slicing program. Even though the built-in Mega Pro doesn’t currently have a profile, Cura’s list of engine choices includes a lot of engines that are AnyCubic. Details on choices and settings are provided in depth in the AnyCubic handbook.
Again, the initial setup is simple, and there are two options. In the first, the printhead moves around the print bed, and the huge height button underneath the bed may be used to manually change the printhead’s height.
You begin to sense the accuracy of this printer as the first layer is extruded.
After the initial few prints, tweaks to the retraction settings helped stop the stringing marks, and print quality remained consistent throughout testing. The overhangs are the only problem with the print quality. However, the bridging is of very high quality, and it appears that the overhangs print nicely in actual printing.
Verifying the quality of the handmade prints reveals that they are just amazing overall.
In addition to print quality, it’s important to note how quiet the printer is—you can hear the fan, but it’s far less noisy than many printers in this price range.
The touchscreen interface is another standout feature; despite its slightly dated appearance, it performs admirably. It’s also beneficial to observe a filament detector, which stops the machine if the filament snaps or you reach the end of the coil, preventing the filament from running out. This lessens the chance of engine damage.
The laser engraver is this device’s additional key component. Once mounted, the laser’s 1500w rating makes it a medium-powered head that enables engraving rather than cutting of materials.
Although the laser engraving capabilities of the device are simple, there is still a ton of space for creativity. It works pretty well.
The wood that has been delivered has good carving quality and is a wonderful addition for crafters and hobbyists.
I conducted the standard testing on the device for the 3D printing functionality. The overhangs are the one area where the outcomes may have been better overall.
Dimensional accuracy – score 5
Target 25 = X: Error 24.85mm / 0.15mm | Y: Error 24.80mm / 0.20mm
Target 20 = X: Error 19.95mm / 0.05mm | Y: 19.98mm / 0.02mm . Error
Target 15 = X: Error 14.99mm / 0.01mm | Y: Error 14.92mm / 0.08mm
Target 10 = X: Error 10mm / 0mm | Y: Error 10mm / 0mm
Target 5 = X: Error 4.98mm / 0.02mm | Y: 4.85mm / 0.15mm . Error
Average Error X = 0.05
Average Error Y = 0.09
Average Error X&Y = 0.07
Smooth Flow Control – score 2.5
Features Negative Good – score 5
Overhang – score 1
Bridge – score 5
XY Resonance – score 2.5
Z-axis alignment – score 2.5
Adding the totals gives a final score of 23.5 out of 30.
That’s a great result for a machine that costs less than $350 and doubles as a laser engraver.
Final verdict AnyCubic Mega Pro review
It’s simple to understand why these devices have shot to fame so swiftly. It is immediately intriguing because of the price, but what really sets it apart is the level of detail.
There are many alternatives for customizing and upgrading, and the build and construction are strong.
With a little tinkering with the quality settings, the print quality can only go better. The machine performs admirably in practically every aspect of print quality, although it has trouble with overhangs.
However, the Mega Pro stands out as one of the most precise 3D printers on the market in terms of dimensional precision.
With the Mega Pro, you can attach a laser engraving head in addition to the 3D printing feature.
Once you’ve completed configuring the program, it’s simple to install and operate. Instead of cutting, the low-power laser makes it perfect for engraving materials.
The AnyCubic Mega Pro is a fully functional device with broad potential.